Enjoy FREE US Ground Shipping on Orders Over $99!
Home > Badge Accessories > ID Badge Holders > Magnetic Badge Holders
Sort By:
Page of 1
501-N Magnetic Single Pocket Vertical Holder - Credit Card Size 501-L Magnetic Single Pocket Large Flap Vertical Holder 501-T1 Magnetic Single Pocket Horizontal Holder
  • Top Load.
  • Product Dimensions 2.65" x 3.88" (67 x 99mm).
  • Insert Dimensions 2.35" x 3.25" (60 x 83mm).
  • Material thickness - front .009" (.23mm).
  • Material thickness - back .013" (.33mm).
  • Product Dimensions 3.03" x 4.33" (77 x 110mm).
  • Insert Dimensions 2.80" x 4.00" (71 x 102mm).
  • Material thickness - front .009" (.23mm).
  • Material thickness - back .013" (.33mm).
  • Top Load.
  • Product Dimensions 3.2" x 3.68" (81 x 93mm).
  • Material thickness - front .009" (.23mm).
  • Material thickness - back .013" (.33mm).
501-R Magnetic Single Pocket Vertical Badge Holder With Circular Flap - Credit Card Size 501-N2 Magnetic 2 Pocket Vertical Badge Holder 501-NA Magnetic Single Pocket Vertical Badge Holder with Thumb Notch.
  • Ingenious circular flap slips easily into any shirt pocket, comfortably securing ID badge in place.
  • Product Dimensions 2.95" x 3.96" (75 x 101mm).
  • Insert Dimensions 2.65" x 3.55 (67 x 90mm).
  • Material thickness - front .009" (.23mm).
  • Material thickness - back .013" (.33mm).
  • Product Dimensions 2.65" x 3.75" (67 x 95mm).
  • Insert Dimensions 2.375" x 3.375" (60 x 86mm).
  • Material thickness - front .009" (.23mm).
  • Material thickness - back .013" (.33mm).
  • Also known as part number 1835-1115.
  • Product Dimension 2.65" x 3.75" (67 x 95mm).
  • Insert Dimensions 2.35" x 3.25" (60 x 83mm).
  • Material thickness - front .009" (.23mm).
  • Material thickness - back .013" (.33mm).
501-GT Magnetic Single Pocket Horizontal Badge Holder - Government Size 501-N2A Magnetic Two Pocket Vertical Badge Holder With Thumb Notch 1835-1050 Magnetic Horizontal Badge Holder Credit Card Size
  • Product Dimensions 4.19" x 2.93" (106 x 74mm).
  • Insert Dimensions 4.00" x 2.63" (102 x 67mm).
  • Material thickness - front .009" (.23mm).
  • Material thickness - back .013" (.33mm).
  • Top Load.
  • Product Dimension 2.63" x 7.0" (67 x 178mm).
  • Insert Dimensions 2.25" x 3.38" x 2 (57 x 86 x 51mm).
  • Material thickness - front and back .25 (6mm).
  • All magnets are shielded, so they won't erase magnetic stripes on ID's and credit cards.
  • Top Load. Product Dimension 3.62" x 2.65" (92 x 67mm).
  • Insert Dimensions 3.50" x 2.50" (89 x 64mm).
1835-1150 Magnetic Vertical Badge Holder - Data/Credit Card Size
  • All magnets are shielded, so they won't erase magnetic stripes on ID's and credit cards.
  • Top Load.
  • Product Dimensions 2.68" x 3.75" (68 x 95mm).
  • Insert Dimensions 2.50" x 3.38" (64 x 86mm).