Rigid Badge Holders

Home > Badge Accessories > ID Badge Holders > Rigid Badge Holders

"Key" Locking 2-Card Holder

1-Card Open-Face Semi-Rigid Card Holder

2-Card RIGIDWEAR Holder

2-Sided Open-Face Rigid ID Holder

Access Card Dispenser

Clear Rigid Vinyl Name Tag Holder

Convertible Card Holder

Easy Access Card Holder

Multi-Card Case Water-Resistant Holder

Thumb Notch Card Dispenser

Sort By:

Page of 2


Guard Key for Locking Card Holder - 1840-6615, Qty = 5 MSRP $29.93 Our Price: $19.95	Frosted Horizontal Half Card Holder - 1840-8000, Qty = 50 MSRP $31.50 Our Price: $21.00	Horizontal Open-Face Rigid Plastic Card Holder, Qty = 50 MSRP $31.50 Our Price: $21.00

Guard key is used to open the 1840-6610 and 1840-6630. Also known as part number OP-706. Sold in packs of 5.	Slide magnetic card through reader without removing from holder. Product Dimensions 3.630 X 1.40" (91 x 36mm). Insert Dimensions 3.38 X 2.12" (86 x 54mm). Material thickness - front and back 0.16" (4mm).	Available in 3 colors! Holds standard credit card size cards and badges. Product Dimensions 2.68" x 3.56" (68 x 90mm). Insert Dimensions 2.14" x 3.45" (54 x 88mm).


Vertical Open-Face Rigid Plastic Card Holder, Qty = 50 MSRP $36.75 Our Price: $24.50	Milky White Semi-Rigid Multi-Card Holder - IPC-91, Qty = 50 MSRP $39.00 Our Price: $26.00	Semi-Rigid Convertible Card Holder, Qty = 50 MSRP $39.00 Our Price: $26.00

Available in 6 colors! Holds standard credit card size cards and badges. Product Dimensions 2.27" x 3.93" (58 x 100mm). Insert Dimensions 2.15" x 3.38" (55 x 86mm).	Can hold up to 6 cards. Product Dimensions 2.28" X 3.40" (58 x 86mm). Insert Dimensions 2.12" X 3.38" (54 x 86mm). Material thickness - front and back 0.45" (11mm). Also known as part number 1840-3025.	Available in 4 colors! Can be used in a vertical or horizontal format. Product Dimensions 2.62" x 3.58" (67 x 91mm). Insert Dimensions 2.16" x 3.48" (55 x 88mm).


Name Tag Holder with Nickel Plated Steel Pin - 2-1/4" x 3-1/2" - 1825-2500, Qty = 100 MSRP $43.50 Our Price: $29.00	2-Sided Horizontal Multi-Card Holder, Qty = 50 MSRP $44.25 Our Price: $29.50	2-Sided Vertical Multi-Card Holder, Qty = 50 MSRP $44.25 Our Price: $29.50

Made of cellulose acetate. Product Dimensions 3.56" x 2.30" (90 x 58mm). Insert Dimensions 3.5" x 2.125" (89 x 54mm). Material thickness - front and back .010" (.25mm). Also known as part number 206-P.	Available in 3 colors! Holds one ID card on one side and up to three ID cards or six business cards on the back side. Product Dimensions 2.94" x 3.65" (75 x 92mm). Insert Dimensions 2.18" x 3.38" (55 x 86mm). Material thickness - front and back .33" (8mm).	Available in 7 colors! Holds your ID and business cards. Made of ABS material. Product Dimensions 2.38" x 4.10" (60 x 104mm). Insert Dimensions 2.26" x 3.58" (57 x 91mm). Material thickness - front and back .367" (9mm).


Economy Crystal Clear Vertical Card Dispenser - 726-CSN, Qty = 50 MSRP $45.75 Our Price: $30.50	Economy Crystal Clear Horizontal Card Dispenser - 726-CT1, Qty = 50 MSRP $45.75 Our Price: $30.50	Economy Frosted Horizontal Card Dispenser - 1840-6000, Qty = 50 MSRP $47.25 Our Price: $31.50

Slotted on the back for use with lanyards, badge reels, or chains. Product Dimensions 4.18" X 2.45" (106 x 62mm). Insert Dimensions 3.38" X 2.12" (86 x 55mm). Material thickness - front and back 0.19" (.5mm).	Slotted on the back for use with lanyards, badge reels, or chains. Product Dimensions 3.54" x 2.76 (90 x 70mm). Insert Dimensions 3 3/8" x 2 1/8". Material thickness - front and back .11" (3mm).	Keeps cards from bending and protects electronics inside proximity and smart cards. Product Dimensions 3.64" x 2.73" (92 x 69mm). Insert Dimensions 3.45" x 2.21" (88 x 56mm). Material thickness - front and back 0.19" (.5mm). Also known as part number 726-T1.


Economy Frosted Vertical Card Dispenser - 1840-6500, Qty = 50 MSRP $47.25 Our Price: $31.50	Rigid Convertible Card Holder - 816-N-CLR, Qty = 50 MSRP $51.00 Our Price: $34.00	Name Tag Holder with Nickel Plated Steel Pin - 2 - 1/2" x 4" - 1825-2300, Qty = 100 MSRP $52.50 Our Price: $35.00

Keeps cards from bending and protects electronics inside proximity and smart cards. Product Dimensions 2.44" x 4.13" (62 x 105mm). Insert Dimensions 2.18" x 3.38" (55 x 86mm). Material thickness - front and back 0.19" (.5mm). Also known as part number 726-SN.	Rigid acetate material protects cards from bending. Product Dimensions 2.682" x 3.56" (68 x 90mm). Insert Dimensions 2.13” X 3.38” (54 x 86mm). Material thickness - front and back .15" (4mm).	Made of cellulose acetate. Product Dimensions 4" x 2.56" (102 x 65mm). Insert Dimensions 4.0” X 2. 50” (102 x 65mm). Material thickness - front and back .009" (.23mm).


Name Tag Holder with Nickel Plated Steel Pin 3" X 4" - 1825-2400, Qty = 100 MSRP $52.50 Our Price: $35.00	Laser Printer Name Tag Inserts - Convention Size - LZ-8 MSRP $55.26 Our Price: $36.84	Laser Printer Name Tag Insert - Credit Card Size, LZ-6 MSRP $55.86 Our Price: $37.24

Made of cellulose acetate. Product Dimensions 4" x 3.06" (102 x 76mm). Insert Dimensions 4.00" x 3.00" (102 x 76mm). Material thickness - front and back .009" (.23mm). Also known as part number 208-P	Badge Inserts 4" x 3" Each pack comes with 60 sheets of 8 1/2" x 11". These are best for convention size name tags. 6 perforated badges per sheet. 360 total name tags in a pack. Insert into any name tag holder.	Each pack comes with 50 sheets of 8 1/2" x 11". These are best for credit card size name tags. 8 perforated badges per sheet. 400 total name tags in a pack. Insert into any name tag holder.


Name Tag Holder with Clip - Convention Size - 208-C, Qty = 100 MSRP $73.50 Our Price: $49.00	Rigid Wear Vertical 2-Card Badge Holder - 1840-6560, Qty = 50 MSRP $91.50 Our Price: $57.00	Premium Frosted Vertical Card Dispenser - 706-N, Qty = 50 MSRP $90.00 Our Price: $60.00

Made of cellulose acetate. Product Dimensions 4" x 3.03" (114 x 101mm). Insert Dimensions 4" x 3" (114 x 101mm). Material thickness - front and back .009" (.23mm). Also known as part number 1825-3015.	This vertical badge holder is made of rigid plastic material to protect cards from bending. It can hold two standard credit card size badges. Product Dimensions 2.38" 3.50" (60 x 89mm). Insert Dimensions 2.15" x 3.38" (55 x 86mm). Also known as part number 706-NN2.	Product Dimensions 2.28" X 3.50" (58 x 89mm). Insert Dimensions 2.13" X 3.38" (54 x 86mm). Material thickness - front and back 0.19" (.5mm). Also known as part number 1840-6540.


Multi-Card Water Resistant Holder - 1840-9000, Qty = 50 MSRP $92.25 Our Price: $61.50	Premium Vertical 2 Card Top Loading Badge Holder - 706-N2, Qty = 50 MSRP $97.50 Our Price: $65.00	Name Tag Holder with Pin/Clip Combo 2-1/2" x 4" - 1825-2555, Qty = 100 MSRP $99.00 Our Price: $70.00

Lightweight and durable. Product Dimensions 2.38" x 3.75" (30 x 95mm). Material thickness - front and back .44" (11mm). Also known as part number WPH-1.	Can hold two standard credit card size badges. Product Dimensions 2.28" 3.60" (58 x 91mm). Insert Dimensions 2.15" x 3.44" (55 x 87mm). Also known as part number 1840-6550.	Perfect for conventions and meetings. Made of cellulose acetate. Product Dimensions 4.00" x 2.50" (89 x 58mm). Material thickness - front and back .009" (.23mm).


Vertical Smart Card Holder with Slide Ejector - 736-N, Qty = 50 MSRP $106.50 Our Price: $71.00	Horizontal Smart Card Holder with Slide Ejector - 736-T1, Qty = 50 MSRP $106.50 Our Price: $71.00	Frosted Rigid Horizontal Card Holder with Key Ring - 706-RNG, Qty = 50 MSRP $108.75 Our Price: $72.50

Complete protection for the electronics inside your smart ID card. This credit card size badge holder is top loading with a handy slide ejector. Product Dimensions 2.28" 3.60" (58 x 91mm). Insert Dimensions 2.15" x 3.45" (55 x 87mm). Also known as part number 1840-6566.	Complete protection for the electronics inside your smart ID card. This credit card size badge holder is side loading with a handy slide ejector. Product Dimensions 3.64" x 2.73" (92 x 69mm). Insert Dimensions 3.45" x 2.21" (88 x 56mm). Also known as part number 1840-6410.	Frosted 1-Card Horizontal Card Holder w/ Slot and NPS Key Ring. Insert size 3.38" x 2.13" (86 x 54mm).


Name Tag Holder with Pin/Clip Combo 2 - 1/4" x 3 - 7/16" - 1825-2005, Qty = 100 MSRP $111.00 Our Price: $74.00	Name Tag Holder with 2-Hole Clip 2" x 3-1/2" - 1825-2520, Qty = 100 MSRP $111.00 Our Price: $74.00	Premium Horizontal 2 Card Badge Holder with Slide Ejectors - 736-T2, Qty = 50 MSRP $126.75 Our Price: $84.50

Made of cellulose acetate. Product Dimensions 3.50" x 2.30" (89 x 58mm). Insert Dimensions 3.45" x 2.25" (88 x 57mm). Material thickness - front and back .009" (.23mm).	Made of cellulose acetate. Product Dimensions 3.5" x 2.06" (89 x 52mm). Insert Dimensions 3.5" x 2.0" (89 x 52mm). Material thickness - front and back .009" (.23mm).	Complete protection for the electronics inside your smart ID card. This credit card size badge holder is side loading with two handy slide ejectors to hold two cards. Product Dimensions 3.58" x 2.46" (91 x 62mm). Insert Dimensions 3.50" x 2.15" (89 x 55mm). Also known as part number 1840-6400.