-1.jpg "Nisca PR-C201 Retransfer Film - Retransfer-Film-(InTM)")
|
|
|
|
|
|
|
|
|
|
|
|
|
- Nisca Retransfer Film
- 500 Prints per Ribbon
- Compatible with Nisca PR-C201 printers only
|
- Nisca Clear ThinFilm / Overlay
- 450 Prints
- 0.5 mil
- Compatible with Nisca SoftCoat Series Laminators
|
- Clear Patch Laminate
- 1.0 mil
- 250 Prints
- Compatible with all Nisca HardCoat Series Laminators
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Clear Patch Laminate
- 1.0 mil
- 250 Prints
- 3/4 Patch for Magnetic Stripe Cards
|
- Clear Alternating Laminate
- 1.0 mil
- 250 Prints
- Full Clear Patch on one side of card
- Secure Holographic Design with Smart Chip Cut-Out on other side of card.
- Compatible with Nisca HardCoat Series Laminators
|
- Generic Secure ID Holopatch
- 1.0 mil
- 250 Prints
- Compatible with all Nisca HardCoat Series Laminators
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- GenuineSecure V2 Design
- 0.5 mil
- 500 Prints
- Nisca ThinFilm is for use with all Nisca SoftCoat Series Laminators
|
- Generic Secure ID Design
- 0.5 mil
- ThinFilm / Overlay
- 500 Prints
- Compatible with Nisca SoftCoat Series Laminators
|
- Clear Laminate
- 1.0 mil
- 125 Prints
- Alternating Full Clear Patch and 3/4 Clear Patch for Magnetic Stripe cut out
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Alternating ISO 7816 Chip Cut-Out, then 3/4 Clear Patch for Magnetic Stripe Cards
- 1.0 mil
- 125 Prints
- Compatible with Nisca Series Laminators
|
- Alternating Secure ID Design and Clear Patch Laminate
- One clear chip, then Secure ID chip, etc.
- 1.0 mil
- 125 Prints
- Compatible with Nisca PR5200 and PR5300 HardCoat Series Laminators
|
- Generic NiSCAPrint Hologram Design
- 1.0 mil
- 250 Prints
- Jumbo Size to Cover Edge-to-Edge
- Tamper Evident (T/E) Security Feature
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Generic NiSCAPrint Hologram Design
- 1.0 mil
- 400 Prints
- Jumbo Size to Cover Edge-to-Edge
- Tamper-Evident (T/E) Security Feature
|
- Nisca Secure ID Hologram InTM Film
- Hologram Retransfer Film
- 410 Prints
- Compatible with Nisca PR-C201
|
|
|
